-
Committee, Shop Manager, SE Regional Rep
Carb Jets for Shop
Well I did write loads (honest) but I am going to place an order for more Mixture screws, I can get hold of air correctors, main jets, and needle valves. What sizes people would be interested in, the carb jets will be hopefully around the £2 mark.
-
Committee, Treasurer, Memberships admin
Re: Carb Jets for Shop
I guess 0.9 air correctors. They can be drilled out to larger sizes.
I expect not so many people would want a standard main jet, I forget their size now, 1.2mm? but they can be drilled out too.
-
Committee, Moderator
Some may replace the bigger main jets for a 120. A 0.9 a/c seem common for tuned engines. Maybe a second stage a/c to replace the fixed bush if people are willing to drill and tap? That's 130, 135 and 140. Again some may want to freshen up the standard jets as the heads break off.
Is Fordy supplying these for us Dale?
-
Committee, Shop Manager, SE Regional Rep
Re: Carb Jets for Shop
I messaged him in the past with no real response, by sounds of it he don't want us to cover our paypal fees, and don't think its best to pay through shop and let him send for these items. I have messaged the guy on eBay last night. Looking for 120,125,130,140 plus the 2.0 needle float. Plus if they have air correctors of 0.9 for the carb as they appear to only have them for solex 40 I think it said and doesn't look the same I don't think, even though comes in the sizes we are after.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules