Results 1 to 7 of 7
  1. #1
    Non-member Cr23g's Avatar
    Join Date
    Sep 2008
    Location
    Aberdeenshire
    Posts
    124
    Post Thanks / Like

    universal accelerator cable

    Done a load of searching but can't find any answers on this.
    Bought the new kit that comes with bits for both the ph1 and ph2, (mines a ph2) supposed to get instructions with it but with my luck i didn't get one.
    in what order does the bits go in/ what bits do i need?

    and how have you guys got the cable routed as iv read a few threads that explain it differently.
    currently got it coming out into engine bay through the hole behind accelerator pedal, and iv got about half a meter of excess cable.

    thanks

    Last edited by Cr23g; 29-05-2015 at 12:16.

  2. #2
    Moderator, Committee Trevhib's Avatar
    Join Date
    Sep 2008
    Location
    Derby
    Posts
    5,829
    Post Thanks / Like

    Re: universal accelerator cable

    Exploded throttle cable diagram in the same place as the other dialogys diagrams for your fuel tank set-up question previously. I think you trim the cable to the length that suits but best to check what other people have done as regards routing.

    Dialogys pics:
    http://s88.photobucket.com/user/paul...?sort=3&page=1

    Throttle cable:
    http://s88.photobucket.com/user/paul...l?sort=3&o=156




  3. #3
    Moderator, Committee Trevhib's Avatar
    Join Date
    Sep 2008
    Location
    Derby
    Posts
    5,829
    Post Thanks / Like

    Re: universal accelerator cable

    Also found these threads which have pics of the pedal end, where it goes through the bulkhead and the connection to the carb.

    https://www.rtoc.org/boards/showthread.php?t=20592

    https://www.rtoc.org/boards/showthread.php?t=29198

    Where were you searching??

    Lol.

    Think all you need to do is find some engine bay pics that show the cable loops round.

  4. #4
    Member michael tierney's Avatar
    Join Date
    Sep 2008
    Location
    Dublin/Ireland
    Posts
    942
    Post Thanks / Like

    Re: universal accelerator cable

    if u can reuse the outer cable and feed the new inner one through it......your much better off

  5. #5
    Non-member Nottswoody's Avatar
    Join Date
    Feb 2012
    Location
    Nottingham
    Posts
    2,683
    Post Thanks / Like

    Re: universal accelerator cable

    Quote Originally Posted by michael tierney View Post
    if u can reuse the outer cable and feed the new inner one through it......your much better off
    What he said mines been sound since I did it this way

  6. #6
    Non-member Cr23g's Avatar
    Join Date
    Sep 2008
    Location
    Aberdeenshire
    Posts
    124
    Post Thanks / Like

    Re: universal accelerator cable

    cheers trev, i don't know, obviously in all the wrong places
    i would of re used the old sheeve but i binned the cable around 6 years ago when i started stripping it because I'm smart..

  7. #7
    Moderator, Committee Trevhib's Avatar
    Join Date
    Sep 2008
    Location
    Derby
    Posts
    5,829
    Post Thanks / Like

    Re: universal accelerator cable


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •