nissan pulsar info?

[mightymanx]

i no its not a renault problem but some 1 may be able to help i no were theres a nissan pular fairly cheap it aint been running for about 2-3 years had a little look at it before and the clutch pedal it flat on the floor would it be the cable?

[chris]

if it has a cable then it could be that or the clutch itself it could be stuck, if it is hydraulic then the seals could of gone in the master or slave cylinder. Without seeing the car its hard to say.

[Tony Walker]

depends what year but im pretty sure its an external slave cylinder on those... which is you should be able to see it and see it leaking, try topping it up and pressing pedal.

http://www.ebay.co.uk/itm/Nissan-Pul...item359cf955df

[chris]

if its fluid yea then could be slavars have a rate but then you will need to bleed it but some cars had a rachet on the actual pedal that goes but if its cheap enough it doesnt take long to work out wat it is

[warpspeed]

It's a hydraulic clutch and the problem is the pivot wears through the clutch fork so that's most likely the problem, gearbox out job to replace.

[mightymanx]

yer thought it may be something like that iaint got a garage so engine outs a no no