Results 1 to 44 of 44
  1. #1
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    200sx t28 oil feed thread size

    Anyone know the thread size for the oil feed on the 200sx t28? Looks like an m10 with a 1mm thread pitch but I want to be sure as I have nothing to measure the thread with.

  2. #2
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by SCHWARTZ View Post
    Anyone know the thread size for the oil feed on the 200sx t28? Looks like an m10 with a 1mm thread pitch but I want to be sure as I have nothing to measure the thread with.
    Gary take the turbo and your turbo oil feed pipe to your local Pirtek matey and they will find you an adaptor will only cost you a few £'s

  3. #3
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    There's one in Mitcham matey

    Pirtek, Unit 11 Liongate Enterprise Park, 80 Morden Road, Mitcham, Surrey, CR4 4NY
    Tel: (020) 8640 6565

  4. #4
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    nice one matey il pop down there

  5. #5
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Make sure you find out though as I need one as well

  6. #6
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    will do

  7. #7
    Non-member TrixNFlix's Avatar
    Join Date
    Oct 2008
    Location
    Preston
    Posts
    2,028
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size


  8. #8
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    4an? is that a thread hose solutions are likely to use? Il call them but il most prob go down to pirtek with the turbo and old adaptor so i know it will fit.

  9. #9
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by SCHWARTZ View Post
    will do
    worst case if they don't tell you the invoice should have the pirtek part number on

  10. #10
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    If it helps steve il pick you one up just need to know how you want the other end.

  11. #11
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by SCHWARTZ View Post
    If it helps steve il pick you one up just need to know how you want the other end.
    Thats would be a great help mate, not sure, I'll prob get Ben @ Hose soloutions to make it so I can specify

  12. #12
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    he did mine so il get 2 of the same

  13. #13
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Went to pirtec turns out its next door to where I get the car mot'd but they had nothing that would fit the turbo they had parts to fit the hose but not the turbo.

  14. #14
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    The search continue's...

    I may ask CR Turbo's tomorrow if they know the size & then at least we can go from there with adapters ??

  15. #15
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    good shout matey. il find out the size of the oil feed hose thread from ben.

  16. #16
    Non-member TrixNFlix's Avatar
    Join Date
    Oct 2008
    Location
    Preston
    Posts
    2,028
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Guys it's a very funny size as I have tried loads of different adapters, the link I put up is the only one I could get to fit.

  17. #17
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Im finding that out bud im going to keep trying but if worst comes to the worst il get that and an adaptor to fit my oil feed hose

  18. #18
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    I've just bought a fitting M14 - 4an, that way I can tell if it fits the oil pressure switch outlet & the turbo

  19. #19
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Good man let me know how you get on

  20. #20
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by SCHWARTZ View Post
    Good man let me know how you get on
    Still need to know what fittings Ben can use or does use on the feeds though.....

  21. #21
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size


  22. #22
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Ace one of those must do it. Im going to ring ben on monday as hes the only one who will know what the thread size is on the feed aparently they did say they did oil feeds for the 200sx t28's so they can find out the thread size for the turbo but not until bens back

  23. #23
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Which end goes into your turbo though, the 1/4 or the 4an ?

  24. #24
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Says 1/4 inverted flare so would have thought that end in the turbo. Could be wrong though.

  25. #25
    Non-member TrixNFlix's Avatar
    Join Date
    Oct 2008
    Location
    Preston
    Posts
    2,028
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by SCHWARTZ View Post
    Says 1/4 inverted flare so would have thought that end in the turbo. Could be wrong though.

  26. #26
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Woop woop

  27. #27
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    So we want 1/4 not 4an to go into the turbo ...

  28. #28
    Non-member TrixNFlix's Avatar
    Join Date
    Oct 2008
    Location
    Preston
    Posts
    2,028
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by 5teve L View Post
    So we want 1/4 not 4an to go into the turbo ...
    Yep, caus I then joined the 4an to a double ended female 4an that attached to my male 4an filter!

  29. #29
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quite poss my oil feed is 4an female remember that being mentioned but not sure.

  30. #30
    Non-member TrixNFlix's Avatar
    Join Date
    Oct 2008
    Location
    Preston
    Posts
    2,028
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by SCHWARTZ View Post
    Quite poss my oil feed is 4an female remember that being mentioned but not sure.
    Good chance as the female connectors look the same on my gt turbo hose solutions turbo oil feed, not measured though. Think 4an is a fairly standard size for turbo oil feeds.

  31. #31
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by TrixNFlix View Post
    Yep, caus I then joined the 4an to a double ended female 4an that attached to my male 4an filter!

  32. #32
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Im sure 4an was mentioned somewhere il wail til mon n see if ben can confirm that

  33. #33
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Well I got an adapter M10x1mm & it's to small & the 1/4" I got was way too big (unless the ysent the wrong adapter).
    The actual size according to CR Turbo's is: 7/16 UNS 24 tpi, they sell adapters for £17.50 + VAT & carraige...

  34. #34
    Non-member WADDIE's Avatar
    Join Date
    Sep 2008
    Location
    Cheshire
    Posts
    83
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    fookin ell how much!!! i should be making these at work if i had the time.

  35. #35
    Non-member philg's Avatar
    Join Date
    Aug 2009
    Location
    Newcastle
    Posts
    2,211
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by 5teve L View Post
    Well I got an adapter M10x1mm & it's to small & the 1/4" I got was way too big (unless the ysent the wrong adapter).
    The actual size according to CR Turbo's is: 7/16 UNS 24 tpi, they sell adapters for £17.50 + VAT & carraige...

    What exacly is it you need? i have a guy near me who made all my barided hose for my engine he has adaptors etc coming out his ears.

  36. #36
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by philg View Post
    What exacly is it you need? i have a guy near me who made all my barided hose for my engine he has adaptors etc coming out his ears.
    I need the above size for my turbo so i can make an oil feed up, the adapter to 4an (or is it 6an) is hard to find...

  37. #37
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Steve ben from hose solutions has them just tell him you want an adaptor when you get your oil feed hose made up. He sent me one out for free so it didnt feel right to ask for another one. I was hoping that he would tell me the size when he sent it but he kept that quiet Il give him a ring if ya want and see what he sent me if you like?

  38. #38
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by SCHWARTZ View Post
    Steve ben from hose solutions has them just tell him you want an adaptor when you get your oil feed hose made up. He sent me one out for free so it didnt feel right to ask for another one. I was hoping that he would tell me the size when he sent it but he kept that quiet Il give him a ring if ya want and see what he sent me if you like?
    Cheers Gary, I will prob get him to make me up a hose at some point when I know how long it needs to be

  39. #39
    Non-member dave j gtt's Avatar
    Join Date
    Oct 2007
    Location
    costa del walney Island NW
    Posts
    1,148
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size


  40. #40
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Quote Originally Posted by dave j gtt View Post
    Nope, they are some of the ones I bought, none the right size

  41. #41
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Is 8mm id hose enough for an oil return hose or does it need a larger dia bore ?

  42. #42
    Non-member TrixNFlix's Avatar
    Join Date
    Oct 2008
    Location
    Preston
    Posts
    2,028
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    Have a look at this Steve, 8mm would be way to
    Small. Think it should be somewhere around 14mm.
    https://www.rtoc.org/boards/showthread.php?t=16387

  43. #43
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size


  44. #44
    Non-member SCHWARTZ's Avatar
    Join Date
    May 2009
    Location
    Wallington south london
    Posts
    3,102
    Post Thanks / Like

    Re: 200sx t28 oil feed thread size

    the return on the b18ft is 16mm

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •