Club Stock

[Bigfoot]

Apart from clothing which people are asking for, what kind of items would you like in the shop. I have added a few items in there just now to get a hang of adding items. So request away and I will see what sort of pricing that they can be done for, or if you want put a rough price needed for them as items no point putting in items which nobody will wont plus must remember to take into account postage so items like discs are going to be not worthwhile doing.

Will look at the Fram Oil Filter putting those in stock as well but need to get some in first before putting them in the shop.

[Mart]

Plugs?

Dizzy cap & arm? (Ducellier type of course )

Fuel filter?

Above + oil filter would make a good service kit

[Andyturbo!]

Inner and outa sills maybe? Not sure how easy they are to come by

[Bigfoot]

What plugs would you want though.

BR8EIX, B8EG, B9EG?

Plugs need to be ordered in but not a problem keeping one set of each in stock

Fuel Filter can source easily as keep stock in branch
Have got a cap which is in stock and arm

[Bigfoot]

Sills would be better with Mike due to storage space, I believe I can get them from work, however paying postage twice as need to order into work first then get them sent out. Don't think I can get them sent direct from my supplier but could find out.

[mingblus3]

Nut and Bolt sets?

Suspension leg set
Headlight and fog set
Bumper sets

etc

[Bigfoot]

Nut and Bolt sets? for what items, as there are a lot of nuts / bolts in the whole car

Suspension leg set - koni suspension in the club shop? talking about OE parts?
Headlight and fog set - Headlights difficult to come about now as discontinued like the log like set
Bumper sets - likewise discontinued from Renault or want silly prices for them, same with grill etc.

Can source new clear white fogs from work.

[R5MJH]

Apart from clothing which people are asking for, what kind of items would you like in the shop. I have added a few items in there just now to get a hang of adding items. So request away and I will see what sort of pricing that they can be done for, or if you want put a rough price needed for them as items no point putting in items which nobody will wont plus must remember to take into account postage so items like discs are going to be not worthwhile doing.

Will look at the Fram Oil Filter putting those in stock as well but need to get some in first before putting them in the shop.

youve opened a can of worms here dale, i was only talking about clothing pmsl

[TopCat]

Foggys u can buy from Ling long on Thailand.

Headlights- someone should try and get some re production ones?

Bumpers/Grilles- Just need a good original one for a
Recast.

All these things can be done, its just a matter of someone (ie a volunteer on the club) being bothered to get it done. Scott and I managed to do it with the decals & gearknob stickers, maybe someone could volunteer to source or reproduce these parts?

[Bigfoot]

youve opened a can of worms here dale, i was only talking about clothing pmsl

That was the idea of me becoming shop manager so I can sort out these parts for the club as for can of worms yes but hopefully will get some positive things out of this to then help club members out.

[Guybrush]

So basically anything that's small, and likely to not be available from Renault/motor factors anytime soon.

Starter motor grommity things?
Brake pad retainer clips?

[Bigfoot]

So basically anything that's small, and likely to not be available from Renault/motor factors anytime soon.

Starter motor grommity things?
Brake pad retainer clips?

Well not Renault as don't want to buy things from Renault then to sell on, but yes like pad retaining clips, which I have already put in place in the shop as an example

[Guybrush]

Aren't there some parts of the front suspension assembly that are hard to get hold of...



So, 7 - 20.

[TopCat]

Do you think renault would give rtoc a big trade discount if we bulk bought things? Things that are stil available? I'm sure they'd jump at the chance of selling redundant stock?

Could be worth a pop?

[Bigfoot]

Aren't there some parts of the front suspension assembly that are hard to get hold of...
(where's the expanded dialogsys picture when you want it)

I tried sourcing the rubber doughnuts but these are coming in as the very flexible style which is not use rather than the ones with bobbles on top, I can source the top bearings if need be. Plus did get the suspension leg dust covers but not sure how much use they are between the different makes of suspension out there.

[Bigfoot]

Do you think renault would give rtoc a big trade discount if we bulk bought things? Things that are stil available? I'm sure they'd jump at the chance of selling redundant stock?

Could be worth a pop?

You trying to fill my garage up of parts

I am trying to stay away from competing against Mike and Bob so wont look at buying Renault OE parts, just aftermarket parts unless inside knowledge of an item is about to go out of stock

[Guybrush]

Campus rear window kit?
Last minute track-passes from 3rd parties?
Fabricated coupe badges?
Rear window sticker "My other car's a GT Turbo"

[JRP]

Do you think renault would give rtoc a big trade discount if we bulk bought things? Things that are stil available? I'm sure they'd jump at the chance of selling redundant stock?

Could be worth a pop?

I guarantee miles done it

[Bigfoot]

90 degree dizzy cap as well as normal style

[clee]

Don't suppose there will be any 21t/25t/gta enginey bits available ...silly priced dizzy caps, ign module etc etc

[Bigfoot]

Don't suppose there will be any 21t/25t/gta enginey bits available ...silly priced dizzy caps, ign module etc etc

If you want to PM which parts you are interested in and rough prices you want, as I take it you will want to purchase in bulk, I am sure I can sort something out for you

Have 2 dizzy caps for the 2.5 GTA in stock as well they look cheap

[mingblus3]

Going back to my last post, for example numbers 4 5 6 from the image below and 12 13 14. I would like new ones and have no idea where to get these from unless I called Renault or Mike

Aren't there some parts of the front suspension assembly that are hard to get hold of...



So, 7 - 20.

[Bigfoot]

12 13 14 are just normal bolts and washers, you need longer ones when fitting a strut brace.

As for 4,5,6 they are expensive from Renault looking at over £10 or more for just one set and you need 4 of them. As for getting elsewhere from a normal bolt shop I am sure possible but more than likely ordered in bulk to get price but how many people will be wanting them. Will however look at headbolts for the club though for the C1J

[mingblus3]

12 13 14 are just normal bolts and washers, you need longer ones when fitting a strut brace.

As for 4,5,6 they are expensive from Renault looking at over £10 or more for just one set and you need 4 of them. As for getting elsewhere from a normal bolt shop I am sure possible but more than likely ordered in bulk to get price but how many people will be wanting them. Will however look at headbolts for the club though for the C1J

Cheers for the reply

[Ian S]

Would have thought Mike or Bob for 4 5 6?

I bought the Unbrako head bolts for the C1J. 200 perhaps, a few years ago. Postage was high both to us and then to the member.

The Volvo ones I had made, supplied to us with the Unbrako for the C1J to keep the delivery cost down.

[TopCat]

You trying to fill my garage up of parts

I am trying to stay away from competing against Mike and Bob so wont look at buying Renault OE parts, just aftermarket parts unless inside knowledge of an item is about to go out of stock

How dare you try and suggest that I'm trying to fill a local members garage full of parts that I may need one day for my own personal parts department that is defamation of character!!

[Bigfoot]

Gear Knob Stickers are now in stock Don't forget the discount code

[Nottswoody]

Are we having any more t shirts dale?

[Bigfoot]

Are we having any more t shirts dale?

Hopefully should be getting some this week, as Dawn had a box of them. So will find out once I receive them.

[car.crash]

Hopefully should be getting some this week, as Dawn had a box of them. So will find out once I receive them.

Sorry mate, had man flu.
I will get the box over next week

[Bigfoot]

Sorry mate, had man flu.
I will get the box over next week

Thats ok mate, dangerous stuff that is

[D4WNO]

RTOC branded dildos for the girls and the gays...Marc will want first order

[fat roofer]

RTOC branded dildos for the girls and the gays...Marc will want first order

Bahahahaha! Made my coffee come out of my nose!!! Pmsl

[rs250nut]

RTOC branded dildos for the girls and the gays...Marc will want first order

Defo adam wrote that!!!!!

[D4WNO]

Haha nope, it was me

[Mr Raider]

Gear Knob Stickers are now in stock Don't forget the discount code

Been trying to find these, how much are they mate?

[Bigfoot]

Been trying to find these, how much are they mate?

https://www.rtoc.org/shop/index.php?m...roducts_id=117

I will try and sort out the shop listing so its easier to find things in there next week

[robx1r]

oe hoses or silicone hoses that look just like oe ones, no branding etc?

[Matt Cole]

Top work Dale. Ive been barking about reproduction parts for a while now so good darts your discussing it. I think Mike is having items reproduced now so i guess not really worth the shop looking into duplicate what he is doing, but certainly smaller hard to get parts, alternative parts re-worked to fit or general service items would be a good start. Front Grilles would make a few quid if it ws ever possible to have these made?

I do think the shop should make a small profit to either re-invest in new stock or put back into the club for events.

[Andy M]

Aren't there some parts of the front suspension assembly that are hard to get hold of...



So, 7 - 20.

It's the top mounts that are OBS on ph2 cars (23 & 22) - these are the pain in the ar$e items to get, you will fail an MOT if they are fubar.

[Bigfoot]

Top work Dale. Ive been barking about reproduction parts for a while now so good darts your discussing it. I think Mike is having items reproduced now so i guess not really worth the shop looking into duplicate what he is doing, but certainly smaller hard to get parts, alternative parts re-worked to fit or general service items would be a good start. Front Grilles would make a few quid if it ws ever possible to have these made?

I do think the shop should make a small profit to either re-invest in new stock or put back into the club for events.

Cheers Matt, its a slow process as I want to make sure the shop is running fine before I start expanding it quickly. I will be adding more parts from my work place to help RTOC out. I am not sure how it works being a non profit organisation though with selling of items with profit, but something which can be discussed.

Always open for ideas on replicating items or supplying through the shop as long as size is reasonable, don't know who could replicate front grills but something which as a club could look into

[Guybrush]

Stainless (patterned or plain) door cards would be good.
Should be cheap enough once there's a decent template.

[Bigfoot]

Stainless (patterned or plain) door cards would be good.
Should be cheap enough once there's a decent template.

Wouldn't have thought there would be much gain from having these done. The ones which Phoenix Autosport are doing or in the process of sorting out will be idea but can be dealt with direct from them rather than going through the club shop.

[LiamR]

https://www.rtoc.org/shop/index.php?m...roducts_id=117

I will try and sort out the shop listing so its easier to find things in there next week

Are these just the stickers as on eBay? Or are they a complete sort of plastic shell/sleeve that places over the top of the gearstick? Like the ones that were on a group buy on here a while back?

[Guybrush]

Wouldn't have thought there would be much gain from having these done. The ones which Phoenix Autosport are doing or in the process of sorting out will be idea but can be dealt with direct from them rather than going through the club shop.

Ah, the flocked ones...
https://www.rtoc.org/boards/showthrea...enix+Autosport

Yeah, i'm not fussed about those.
Guess i'll sort out something myself then... sniff.

Wouldn't have thought there would be much gain

You're wrong, there's gonna be ALL KINDA GAINZZ.

[Bigfoot]

Are these just the stickers as on eBay? Or are they a complete sort of plastic shell/sleeve that places over the top of the gearstick? Like the ones that were on a group buy on here a while back?

Clue is in the description but these are the full stickers which was in the group buy from TopCat

[Bigfoot]

Ah, the flocked ones...
https://www.rtoc.org/boards/showthrea...enix+Autosport

Yeah, i'm not fussed about those.
Guess i'll sort out something myself then... sniff.

You're wrong, there's gonna be ALL KINDA GAINZZ.

Yeah 50BHP extra from Stainless System my mate dave got an extra 60bhp but he had a max power sticker to go with it

[robx1r]

if you'd like a hand doing anything just ask, i have good contacts in the Motorsport trade so might be able to get the grille done? or anything else you need help with?

[Bigfoot]

Cheers Robbie, will keep that in mind.

[Junglist]

Tyres. ? 195 55 13.