drive shaft poping out

[gimme5]

put new bottom arms, springs and shocks on car,but when i fasten hub nut up on
passenger side it is pulling shaft out of gearbox enough to make it jump in and out when in gear being restoreing car for nearly 5 yrs and fitted arms etc 4 yrs ago
is it possible to get a slightly longer bottom arm of a different model by mistake:confused:
also sitting high with engine back in think i might have wrong springs f###ing motor factors

[Andrew Cooke]

yep, it's pretty common to be given clio arms by mistake. Do you have a load of negative camber?

edit - I keep saying clio, but I think kit might be R11 instead :sad2:

[gimme5]

is that where wheel go's in at top if so then yer but not really noticable
must have clio ones on, cant return them after 4 yrs bummer:cry:

[Andrew Cooke]

someone posted some pics showing where to measure the arms to confirm what you have, have a search, I'll see if I can find it too.

[gimme5]

will do thanks for quick reply:agree:

[Andrew Cooke]

http://www.rtoc.org/boards/showthread.php?t=8706&highlight=r11+wishbone&page=2

unfortunately the pic that "The Master" posted has gone, but the dimension he gave should be right.

[gimme5]

the measurment they give, is this the length edge to edge?

[Andrew Cooke]

http://i567.photobucket.com/albums/ss116/AndrewCooke/wishbone.jpg?t=1278527945

[gimme5]

thanks alot for help i know what i need to do to get this sorted
:)

[raj]

yes it'll be your wishbones.

i had the same issue, after fitting polybushes to the wishbones and fitting them then noticing that the car had alot of negative camber(which looked kinda kool) i found with help on here that i was supplied with r9/r11 wishbones:rolleyes: i still have these sat in the garage.
was all sorted when fitted with the right wishbones:agree:

[c7borg]

so on the r11 is it just the wishbones and driveshafts that differ.. ie the subframe remains the same?

[Andrew Cooke]

so on the r11 is it just the wishbones and driveshafts that differ.. ie the subframe remains the same?

i *think* that's different too

[gimme5]

looks like this might grow arms and legs!!!!!!!!:laugh:

[i l k e r]

i *think* that's different too

you're right Andy :agree:

it's bigger, about 4-5 inches either way ;)

[c7borg]

is there anywhere other than Renault that sells the r11 driveshafts.. it's not something GSF seem to do?

[gimme5]

new bottom arm fitted, problem sorted could'nt believe difference when i offered it up to the other one