bargain new 5 subframe

[mr white]

http://cgi.ebay.co.uk/RENAULT-EXTRA-FRONT-SUBFRAME-6841320-HADRIAN-NEW_W0QQitemZ330372847889QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item4cebc19911

alot cheaper than reno:)

[Matt Cole]

Will that fit a gt? I could do with a new subframe!!

[Lewis]

Should bolt on but there are some differences where the radiator mounts. Brigsy should have a better idea what these are

[mr white]

i would have thaught so think they only list one subframe for 5`s.
ive got a valver subframe fitted to my 5 only mod was to drill the drivers side front crossmember mounting hole on the subframe about 1cm back. all clio 1`s from 90 to 98 have the same subframes inc 16v. apart from williams wich is double skined.

[gtmatt]

Its not o.e also

[phase i 16 v turbo]

Not a straight fit, one hole needs redrilling. Front driver's side.

[c7borg]

Not a straight fit, one hole needs redrilling. Front driver's side.

what is that hole for? are the main four mounting points and bottom arm suspension points in the same place?

I could do with a spare myself

[phase i 16 v turbo]

what is that hole for? are the main four mounting points and bottom arm suspension points in the same place?

I could do with a spare myself

It is one of the main four mounting points, driver's side front. Then I had to set the tracking up again.

[mr white]

yep got to do my tracking again now. track rods have plenty of thread available for the extra width, fitting clio wishbones are 1cm wider either side and renault 5 steering rack fits the clio subframe fine.
do get a fair bit of neg camber though, but corected a fair amount with some camber bolts.

[Slim]

i want negative camber :(